|
|
|
|
|
|
Addition Funnel, Long Stem, 58° Angle, 6In
|
|
|
KIMAX funnel constructed with heavy uniform walls and strong, molded rims and fire polished stems to give a long service life. Funnels have a high resistance to chemical attack and mechanical and thermal shock. The 58 º funnel angle is a Ki
|
|
|
|
|
|
|
|
|
|
Addition Funnel, Short Stem, 58° Angle
|
|
|
KIMAX funnel constructed with heavy uniform walls and molded rims and fire polished stems to give a long service life. Funnels have a high resistance to chemical attack and mechanical and thermal shock. The 58º funnel angle is a Kimble excl
|
|
|
|
|
|
|
|
|
|
Addition Funnel, Long Stem, 60° Angle, Wide Top, 6In
|
|
|
KIMAX funnel constructed with heavy uniform walls and strong, fire polished rims and stems to give a long service life. Funnels have a high resistance to chemical attack, mechanical, and thermal shock. Designed from ASTM Specification E1095
|
|
|
|
|
|
|
|
|
|
Addition Funnel, 1 1/2In Short Stem
|
|
|
KIMAX funnel with a short, wide stem. Constructed with a heavy uniform wall and a strong, fire polished rim and stem to give a long service life. Funnel has a high resistance to chemical attack and mechanical and thermal shock. Designed fro
|
|
|
|
|
|
|
|
|
|
Addition Funnels, Graduated, Joints, With Ptfe Metering Plug
|
|
|
This funnel incorporates the use of a KONTES PTFE "Varibor" metering plug 821111. Turning the adjusting knob allows control of flow rate from dropwise to full flow. This feature facilitates reproducible addition rates.
|
|
|
|
|
|
|
|
|
|
Addition Funnels, Graduated, Joints, Glass Plug, With Or Without Stopper
|
|
|
Cylindrical funnel has a pressure equalizing line and a glass stopcock. Graduations to the stopcock are numbered both up and down. Supplied with an 850400 hex-head stopper. The 299251 series funnel is supplied without stopper.
|
|
|
|
|
|
|
|
|
|
Funnel Addition
|
|
|
|
|
|
|
|
|
|
|
|
|
Addition Funnels, Graduated, Joints, Ptfe Plugs, With Or Without Stopper
|
|
|
Cylindrical funnel has a pressure equalizing line and PTFE stopcocks. Graduations to the lower stopcock are numbered both up and down. 299311 is supplied without a stopper. Stopcocks have 821001-0002 plugs.
|
|
|
|
|
|
|
|
|
|
Funnels - Constant Addition
|
|
|
Precision-type for setting flow rates from 1 to 160 drops per minute of water at 25 ºC. Shut-off seal is made by lowering the PTFE shoulder into a specially formed glass seat.
Design is based on the Mariotte principle and assures the drop
|
|
|
|
|
|
|
|
|
|
Replacement Plugs Addition Funnels, Graduated, 24/40 Joints
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Addition Funnel, Long Stem, Thistle Top, 12In
|
|
|
KIMAX tube with a sturdy, extra long stem. Shape of the funnel is cylindrical (similar to the "thistle top" style).
|
|
|
|
|
|
|
|
|
|
Powder Addition, Joints Funnels
|
|
|
Useful for the addition of reactants to a variety of flasks.
|
|
|
|
|
|
|
|
|
|
Powder Addition Funnels, Offset
|
|
|
Funnel has a lower stem made with an offset to permit use with multi-neck flasks.
|
|
|
|
|
|
|
|
|
|
Solvent Addition Funnel, Polypropylene, Set Of Five, 5/CS
|
List Price: $76.10
Our Price: $73.88
Limited Time Promotion $72.40 EA
You save $3.70!
|
|
|
Unbreakable, polypropylene solvent addition funnels for use with chromatography columns. The unique closed-end design facilitates gentle addition of solvent to the column. Perforated funnel stem permits solvent to pour down the column wall
|
|
|
|
|
|
|
|
|
|
Powder Addition, Modified, Joint Funnels
|
|
|
Designed with one side flattened to allow funnel to be used in multi-neck flasks where space is limited. Flat side dimension is the distance between the center of the standard taper inner joint and the flattened side of the funnel.
|
|
|
|
|
|
|
|
|
|
Solvent Addition Funnels, Basic
|
|
|
Design permits addition of solvents to flash chromatography columns without disturbing the silica-gel / packing layer. Lower end of the funnel is closed and the stem has a series of small holes for solvent drainage. Funnel top is 75 mm in d
|
|
|
|
|
|
|
|
|
|
Addition Funnel, Short Stem, Baffled
|
|
|
A piece of filter paper, when folded to form the filtering cone, makes a precise 60º angle. If the funnel is also 60º, as are the vast majority, then the only effective filtering area is down near the tip. The exclusive Kimax 58 º funnel pr
|
|
|
|
|
|
|
|
|
|
Powder Addition Funnels, Vacuum, With Joint
|
|
|
These funnels are great for adding solids or liquids to reaction set ups under vacuum conditions. Applying a vacuum cuts filling time in half. The funnels have a 60 º side angle and a standard taper inner joint.
|
|
|
|
|
|
|
|
|
|
|
Addition Funnels, Joints, Ptfe Plug, With Stopper
|
|
|
Cylindrical funnel has a PTFE stopcock and a glass hex head stopper. 298781 and 633031 are supplied without a stopper.
|
|
|
|
|
|
|
|
|
|
|
Addition Funnels, Cooling Bath, Joints, With Ptfe Plug
|
|
|
Cylindrical funnel designed for cooling with dry ice. Bath has an 8 mm O.D. drain outlet.
|
|
|
|
|
|
|
|
|
|
|
Addition Funnels, Cooling Bath, Joints, With Glass Plug
|
|
|
Cylindrical funnel designed for cooling with dry ice. Bath has an 8 mm O.D. drain outlet.
|
|
|
|
|
|
|
|
|
|
|
Addition Funnels, 24/40 Joints, With Glass Plug
|
|
|
Cylindrical funnel has a pressure equalizing line and a glass stopcock.
|
|
|
|
|
|
|
|
|
|
|
Addition Funnels, Joints, With Ptfe Plug
|
|
|
Cylindrical funnel has a pressure equalizing line and a PTFE stopcock.
|
|
|
|
|
|
|
|
|
|
|
Funnel Addition Thrd
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Addition Funnels, Graduated, Joints, With Ptfe Threaded Valve
|
|
|
Cylindrical funnel has a threaded, grease-free extended tip valve for semi-needle action and pressure equalizing arm. Funnels with 14/20 and 19/22 joints are supplied complete with a stopper.
|
|
|
|
|
|
|
|
|
|
|
Addition Funnels, Graduated, 24/40 Joints, With Glass Plug
|
|
|
Cylindrical funnel has a pressure equalizing line and a glass stopcock. Graduations to the stopcock are numbered both up and down. Supplied without a stopper.
|
|
|
|
|
|
|
|
|
|
|
Addition Funnels, Graduated, Ptfe Plug
|
|
|
Cylindrical funnel has a pressure equalizing line and a PTFE stopcock. Graduations to the stopcock are numbered both up and down. Supplied without a stopper.
|
|
|
|
|
|
|
|
|
|
|
Funnels - Constant Addition
|
|
|
Precision-type for setting flow rates from 1 to 160 drops per minute of water at 25 ºC. Shut-off seal is made by lowering the PTFE shoulder into a specially formed glass seat.
Design is based on the Mariotte principle and assures the drop
|
|
|
|
|
|
|
|
|
|
|
Funnels Constant Addition Stopper Only, 1/EA
|
List Price: $55.18
Our Price: $53.57
Limited Time Promotion $52.50 EA
You save $2.68!
|
|
|
Funnels Constant Addition Stopper Only Precision-type for setting flow rates from 1 to 160 drops per minute of water at 25C. Shut-off seal is made by lowering the PTFE shoulder into a specially formed glass seat.
|
|
|
|
|
|
|
|
|
|
|
Funnels Constant Addition [Standard Taper] 24/40 Joints With Jacket
|
|
|
|
|
|
|
